Written in collaboration with Surrey Sash Restoration Specialist

When buying an older Victorian or Georgian property, new homeowners often face the common problem of painted-shut sash windows. Upon moving into their new home, they were disappointed to find that the original wood sash windows were closed with paint layers over the years.

This is an extremely widespread issue in old houses in the UK and Hertfordshire in particular.

Not only does this prevent fresh air from entering, but it also ruins the intended function of the windows. Luckily, with some effort, a painted shut sash window can usually be restored to smooth operation.

Reasons sash windows become painted shut

There are two main reasons sash windows become painted shut over time:

  • Multiple layers of paint
  • Improper recent maintenance where the painter did not wait until the paint dried before closing the sash shut.

As sash windows are repainted through the years, layers of paint build up on the wooden windows and frames. This slowly fills in any gaps between the movable sash and the window frame until the sash cannot slide open.

Techniques to free a stuck sash window

Careful effort is required to open a sash window that has been painted shut. Here are some recommended techniques:

  • Cut through paint layers with a utility knife or cool tool – Run a sharp utility knife around the painted shut edges to cut through the built-up paint. Go slowly and be careful not to cut too deeply into the wood.
  • Heat with a hairdryer – Use a hairdryer to gently heat the painted edges, which can help soften the paint layers. Be cautious not to scorch or ignite the wood.
  • Lubricate the tracks – Use a wax stick or silicone spray to lubricate the window tracks. Once the paint layers are cut, this helps the sash slide more freely.
  • Gently tap – After heating, cutting, and lubricating, gently tap the window sash with a rubber mallet. The vibration can help loosen the sash.
  • Consider professional sash windows repair – If DIY efforts are unsuccessful, consider hiring a professional window restoration company. They have specialized tools and expertise for freeing stuck sashes and restoring functionality.

Dealing with years of paint buildup

If your window sashes are stuck due to many years of paint buildup, the situation calls for a little more elbow grease.

You’ll need to break through the layered paint to free the sash.

This may take some time and effort, but with the right tools and techniques, you can get the job done.

  1. Start by using a multitool with a saw blade to carefully cut through the layers of paint around the edges of the sash where it meets the stops. Apply firm but gentle pressure as you work the blade back and forth to penetrate the built-up paint.
  2. Next, switch to a putty knife, paint scraper, or other thin, rigid tool and insert it into the cut you made with the multitool. Slowly work the scraper side to side and up and down to break the sash free. Apply patience and force as needed to scrape off the paint layers. Twist the scraper as you work to help remove paint.

Sometimes sash windows can be painted shut for a reason, so don’t be surprised if you unstick the sashes and find that the weights are missing, for example.

Getting the sash moving again

Once you’ve cut and scraped away enough paint buildup, try forcing the sash up and down. If paint shards or sticky spots still obstruct movement, continue working them free with your tools. The goal is to clear away paint until the sash can slide freely.

Other reasons the sashes can be stuck apart from being painted shut

Stuck sash windows can be incredibly frustrating, but paint isn’t always the culprit. Here are some other common reasons your sash windows may be stuck shut:

  • Swelling of the wood from moisture or humidity changes can jam sashes: Make sure there are no leaks or condensation issues. Light sanding and lubricating seasonal sticking due to wood swelling can help.
  • Misaligned sash tracks from settling, sagging, or warped frames over the years is also common. Shimming and adjusting the tracks may be necessary.
  • Broken sash cords, chains, or springs can lead to off-kilter sash balancing and sticking. Replacing worn hardware solves many sticky sash issues.
  • Built up layers of dirt and grime over the years can cause sashes to stick and bind in the window tracks. Regular cleaning and lubrication is key to keeping sashes operating smoothly.

Take a close inspection of your stuck sashes and surrounding window frames to properly diagnose the issue. With some targeted maintenance, repair, cleaning, lubrication, and adjustment, you can get your sash windows smoothly sliding again.

You may also like...